Ebtron Airflow Product GTx116 Transmitter Option Boards and Expansion Accessories

GTx116 Transmitter Option Boards and Expansion Accessories

EBTRON's top-of-the-line Gold Series transmitters accept Option Boards that allow for selection of transmitter output type for connection to virtually all modern building automation systems (BAS). These Option Boards are easily installed in the field in the event of future BAS network changes. In addition, the Gold Series transmitters feature an expansion port for add on accessories such as the EB-Link Infrared Communication Accessory.

GTC116 - Combination Dual Analog Output AND RS-485 BACnet Output with Programmable Alarms The GTC116 Combination Board permits simultaneous operation of dual analog outputs and an RS-485 BACnet interface. This innovative option board also includes a programmable alarm feature with user defined alarms for hi limit, low limit or dead band with hysteresis. In addition, a powerful integration filter can be engaged to reduce the potential for false/nuisance alarms. Isolated analog outputs are selectable (0-5/0-10VDC, 1-5/2-10VDC or 4-20 mA linear for airflow/temperature). The RS-485 output is field selectable for BACnet® MS/TP Master, Modbus RTU or JCI N2-Bus protocols at 9.6k, 19.2k, 38.4k, and 76.8k baud.

GTE116 - Combination Dual Analog Output AND Ethernet Output with Programmable Alarms The GTE116 Combination Board permits simultaneous operation of dual analog outputs and a 10 base-T Ethernet output for BACnet Ethernet, BACnet IP, Modbus TCP or TCP/IP protocols. This innovative option board also includes a programmable alarm feature with user defined alarms for hi limit, low limit or dead band with hysteresis. In addition, a powerful integration filter can be engaged to reduce the potential for false/nuisance alarms. Isolated linear analog outputs are selectable (0-5/0-10VDC, 1-5/2-10VDC or 4-20 mA) for airflow/temperature.

GTL116 - LonWorks Output Board The GTL116 output board provides a LonWorks compatible FTT-10 Free Topology transceiver high speed interface at data rates of up to 78k baud.

GTD116 - USB Data Logger Board The GTD116 Data Logger board permits logging of an air flow station transmitter using a commonly available USB thumb drive (not provided). The Data Logger records measured airflow, temperature and measurement time stamp at 5 minute intervals (selectable from 1 to 999 minutes). Ebtron provides optional free software if changes to the factory default UTC time setting or 5-minute sample interval are required.

EB-Link Infrared Communication Accessory The EB-Link accessory permits rapid traverse of duct airflow using an infrared interface to your PDA. It can also be used for uploading of transmitter configuration/set-up.

The following registered logos and trademarks are used throughout the EBTRON website: BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). MODBUS® is a registered trademark of Modbus Organization, Inc. 'USGBC®' and related logo is a trademark owned by the U.S. Green Building Council® and is used with permission. 'LEED®' and related logo is a trademark owned by the U.S. Green Building Council® and is used with permission.

Privacy Statement